Winamp Logo
Welding Tips and Tricks Podcast Cover
Welding Tips and Tricks Podcast Profile

Welding Tips and Tricks Podcast

English, Education, 1 season, 306 episodes, 5 days, 16 hours, 53 minutes
About
Thanks for Listening to the Welding Tips and Tricks Podcast! We wanted to bring you another way of experiencing Welding Tips and Trick by being able to listen to Weldor's talking about Welding while your at work Welding!
Episode Artwork

Tungsten Angles

Thank you for listening to episode 274 of the Welding Tips and Tricks Podcast!  This week we're talking about Tungsten Angles.  We asked for topic ideas on Instagram last week and this was one of the many replies we received.  We go all over the place with this topic but really cover a lot of ground.  Hope it helps!  Have a great week and if you enjoy the show please subscribe on your favorite podcast apps and also share the show with others!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/14/20221 hour, 1 minute
Episode Artwork

Product Development

Thank you for listening to episode 273 of the Welding Tips and Tricks Podcast!  This week we're talking about product development!  All three of us have developed a product of some kind and brought it to a small market.  We thought it would be fun to talk about some of the experiences we've had during that time and hope this conversation might spark a fire in you to bring your idea for a product to life!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/7/202256 minutes, 2 seconds
Episode Artwork

Bulldog Welding Aaron Biefer

Thanks for listening to the Welding Tips and Tricks Podcast!  For this week's guest we had Aaron Biefer better known as @Bulldogwelding on Instagram!  Aaron has been a good friend of ours for a long time but we've never really known what he did for his day gig, until now!  We hope you enjoy this chat with Aaron and have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/28/202249 minutes, 53 seconds
Episode Artwork

Stick Rods

Thank you for listening to episode 271 of the Welding Tips and Tricks Podcast!  This week we're talking about Stick Rods!  Jody had recently posted a video on YouTube about different stick rods and we thought we could continue the conversation and see where it went.  Hope you can pick out a few good nuggets to help you along your way!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/21/202229 minutes, 41 seconds
Episode Artwork

Mike Best

Thank you for listening to episode 270 of the Welding Tips and Tricks Podcast!  This week we had a fun chat with Mike Best from @bestfabllc on Instagram.  Mike has an interesting story on how he got into welding and started his own business.  Also, how he met Jody for the first time.  We hope you can pull a few nuggets out of this episode to help you along the way!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/14/202255 minutes, 33 seconds
Episode Artwork

Shop Upgrades

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/8/202250 minutes, 17 seconds
Episode Artwork

Shop Upgrades

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/8/20220
Episode Artwork

Shop Upgrades

Thank you for listening to episode 269 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about upgrading your shop.  What kinds of things can you do and when is a good time to do the upgrades.  Jonathan is right in the middle of doing such things so we thought this would be a good time for this conversation.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Abraham Fabrication,Rick's Welding Service, David Doherty, L&N Welding, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/8/20220
Episode Artwork

Consistency with Brad Goodman

Thank you for listening to episode 268 of the Welding Tips and Tricks Podcast!  This week we're talking about some tricks you can do to get a consistent weld.  Brad Goodman joins in on this conversation to add some insight.  We hope that this episode helps you start laying more consistent beads!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
1/24/20221 hour, 8 minutes, 38 seconds
Episode Artwork

Looking ahead to 2022

Thank you for listening to episode 267 of the Welding Tips and Tricks Podcast!  This week's episode we're keeping up with our tradition by looking ahead to the upcoming year, at least that's how the episode starts.  It takes on it's on topic but overall keeps the theme.  Hope everyone has great plans for 2022 and looking forward to seeing them all come to life!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
1/17/202256 minutes, 48 seconds
Episode Artwork

Looking back over 2021

Thank you for listening to ep 266 of the Welding Tips and Tricks Podcast!  For this week's episode we're taking a minute to look back over the past year and reflect on how it went.  We like to do this every year and think you should take the time to do it for yourselves.  Hope everyone had a great holiday season and thank you for understanding our holiday vacation break!  It's good to be back at it!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
1/10/202247 minutes, 17 seconds
Episode Artwork

Coming Back Next Week!

Hey Everyone!  Just a heads up that we'll be back next week with our looking back over 2021!  We enjoyed our time off and took an extra week with New Years and all but looking forward to getting back to it for 2022!   If you're looking for something to listen to be sure to head over to the ArcJunkies Podcast and give this week's episode (206) a listen.  Jason had a really good conversation with Mike Miller about a dark part of our industry and blue collar workers in general.  Drunks and Alcohol can be a really big problem for some of us and we wanted to make sure that everyone hears this.  This episode is not family friendly but well worth a listen.  If you're new to the trade you really want to listen to this one!   
1/4/20221 minute, 46 seconds
Episode Artwork

Reposting Garage Bound LLC

Thanks for listening to this week's episode of the Welding Tips and Tricks Podcast!  We're on a little vacation from recording but still wanted to put out an episode so we're going to be reposting a few from the past over the next few weeks.  This week we're looking back at the conversation we had with Micheal Brandt from Garage Bound, LLC.  Micheal has a crazy story and well worth a second listen!  Thank you for all the support and have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
11/8/20211 hour, 12 minutes, 25 seconds
Episode Artwork

Nov-Dec Announcement

Hey Everyone! This is just a little heads up to let you know that we are going to be taking a little vacation during the 2021 holiday season.  During this time we are going to be spending some quality time with our families along with coming up with ways to improve the podcast for 2022!  We hope everyone has a great holiday season and is able to also slow down a bit to be with their families, too.    Thank you for the last 5 years of support!  We are looking forward to the next few weeks being off but also looking forward to what is to come with the podcast in 2022!  
11/1/20214 minutes, 55 seconds
Episode Artwork

Tig Science

Thank you for listening to episode 265 of the Welding Tips and Tricks podcast!  For this week's chat we started off with a topic of the Science of Tig Welding and just let it go from there.  This one will be good for those that are a bit new to Tig welding!  Hope this one helps you a bit!  Have a great week everyone!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
11/1/202157 minutes, 41 seconds
Episode Artwork

Safety

Thank you for listening to episode 264 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about safety.  This topic got brought up because one of us had a little accident and we thought it would be a good time to remind everyone to slow down a bit to think.  We hope this episode will do just thinking plus help you remember a few things that might have happened to you in the past.  It is very easy to become too comfortable in this industry and something happens in a blink.      If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
10/25/202152 minutes, 53 seconds
Episode Artwork

Magnetic Fields with Ray Hebert from MagSwitch

Thank you for listening to episode 263 of the Welding Tips and Tricks Podcast!  This week we had a very interesting conversation with Ray Hebert from MagSwitch all about welding around a magnetic field.  We definatly learned a lot and know you will, too!  Be sure to check out these tools over on their site Mag-Tools.com.       If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
10/18/202148 minutes, 26 seconds
Episode Artwork

Welding Notes

Thank you for listening to episode 262 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about keeping a welding journal or different types of notes.  What do we think of this and do we do it ourselves?  Hopefully, this episode will help you decide if you'd like to jot down things a little more.  Have a great week and thank you for all the support!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
10/11/202145 minutes, 9 seconds
Episode Artwork

5G vs 6G

Thank you for listening to episode 261 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about 5G tests over 6G tests.  This chat started over a text between us three and we thought it would be a good idea to dive a little deeper into why companies might use different tests instead of just one that should cover almost all of it.  Hope this one helps a bit!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
10/4/202150 minutes, 24 seconds
Episode Artwork

Back Pain

Thank you for listening to episode 260 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about something that we all at some point have dealt with, back pain.  Generally, it all started when we were younger and dumber thinking we could lift the world and slipped that one time...  Now older, that one stupid mistake plagues you ever so often.  We thought it would be a good time to talk about this to remind everyone to take a minute to slow down and think about what you're doing.  Could you use a crane for this, get some help, a forklift?  Hope this episode helps in some way!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
9/27/202152 minutes, 2 seconds
Episode Artwork

Productivity

Thank you for listening to episode 259 of the Welding Tips and Tricks Podcast!  This week's episode is all about staying productive and some of the things we have tried to help improve our productivity.  If you're running your own business you know that you wear many hats and you also understand the more productive you can be the more money you can make on each job.  Hope this episode can help!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
9/20/202140 minutes, 59 seconds
Episode Artwork

Filler Wire Selection and More

Thank you for listening to this week's episode!  We get asked all the time about different filler wire selection so we thought it would be a good time to do an episode!  Hope this one helps you when something strange comes up!  Have a great week everyone!     If you're headed to FabTech have a great time!!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
9/13/202144 minutes, 28 seconds
Episode Artwork

Filler Wire Selection and More

Thank you for listening to this week's episode!  We get asked all the time about different filler wire selection so we thought it would be a good time to do an episode!  Hope this one helps you when something strange comes up!  Have a great week everyone!     If you're headed to FabTech have a great time!!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
9/13/20210
Episode Artwork

Repost of Episode 13 with Mike Zanconato

Thank you for listening to this week's Welding Tips and Tricks Podcast!  Due to travel schedules and work schedules we were not able to record a new episode this past week, so we are reposting a past episode to still help kick off your week.  We're going back to episode 13 with Mike Zanconato the bike builder!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where can you find Mike?    On Instagram @MZank On the Web at cycling.zanconato.com   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
9/7/20211 hour, 30 minutes, 11 seconds
Episode Artwork

Outside your scope

Thank you for listening to episode 257 of the Welding Tips and Tricks Podcast!  This week we're talking about when you take on a job that is a little out of your scope.  That could be a side hustle job or a different type of task at your day job.  We all encounter this from time to time so thought it would be something good to talk about.  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
8/30/202141 minutes, 2 seconds
Episode Artwork

Passed your test...now what...

Thank you for listening to episode 256 of the Welding Tips and Tricks Podcast!  For this week's chat we continue the conversation about getting your first job after school or passing your first weld test.  At this point in your career you're in a bit of a limbo stage where you can weld but not sure how to fabricate.  We've all been there and this is a little about our stories and also our thoughts.  Hope you can pick up a few nuggets from this one or will send you down memory lane.  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
8/24/202150 minutes, 11 seconds
Episode Artwork

Goal Setting

Thank you for listening to episode 255 of the Welding Tips and Tricks Podcast!  This week we're talking about Goal Setting and is it really that important?  We're honestly all over the board with this and we all try different things to keep us moving in the right direction.  We hope this chat might help you figure out your future goals!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
8/16/202156 minutes, 22 seconds
Episode Artwork

Puddle Control

Thank you for listening to episode 254 of the Welding Tips and Tricks Podcast!  For this week's chat we're answering a question that we saw on the WelderSkills.com Forum.  That being what controls the size of the puddle while welding aluminum with Tig.  There are a lot of different things that can affect the puddle and its size so we just let this conversation roll where it wanted.  Hope everyone has a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
8/9/202147 minutes, 28 seconds
Episode Artwork

@Steel_Gun_Fab, Brad McKee

Thank you for listening to episode 253 of the Welding Tips and Tricks Podcast!  For this week's episode we had a great chat with @Steel_Gun_Fab aka Brad McKee.  Brad's story is very interesting and he delivered some serious knowledge bombs if you're looking at starting a business.  You're going to want to get your paper and pencils out for this one!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where can you find Brad?   On Instagram @Steel_Gun_Fab    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
8/2/20211 hour, 11 minutes, 39 seconds
Episode Artwork

Schools vs Industry

Thank you for listening to episode 252 of the Welding Tips and Tricks Podcast!  This week's chat is about the disconnect between Schools and Industry.  We know this is a touchy subject and can be very controversial at times.  Just remember we all want the best for this industry and we understand that schools are limited to many variables.  This is just the beginning of the conversation and we're looking forward to having more in the future.  This topic hits home to us all.      If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
7/26/20211 hour, 12 minutes, 26 seconds
Episode Artwork

Reading Prints

Thank you for listening to episode 251 of the Welding Tips and Tricks Podcast!  For this week's chat we're talking about reading prints.  Being able to lay a good solid weld is only a fraction of the battle.  Being able to build the job to what the designer or engineer intended is the whole point!  The print is a key factor in transmitting this information and being able to decipher what is needed is a very important skill that you need to learn!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
7/19/202158 minutes, 35 seconds
Episode Artwork

First Half of 2021

Thank you for listening to episode 250 of the Welding Tips and Tricks Podcast!  For this week's chat we thought it would be a good time to have a look back at this first half of 2021.  We hope your year has been going great and looking forward to seeing what the rest of this year has to offer up!  Have a great week everyone!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, CR Fabrication, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
7/12/202158 minutes, 37 seconds
Episode Artwork

WelderSkills.com

Thank you for listening to episode 249 of the Welding Tips and Tricks Podcast!  If you follow any of the three of us on Instagram you've seen us talking about WelderSkills.com.  We thought it would be a good time to explain a little more of what it is and what the hopes are for it to become.  Hope this answers a few questions!  Have a great week!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
7/5/20211 hour, 2 minutes, 36 seconds
Episode Artwork

@Keypointfabrication Ron Sackowitz

Thank you for listening to episode 248 of the Welding Tips and Tricks Podcast!  For this week's chat we had a fun talk with @Keypointfabrication aka Ron Sackowitz.  Ron has an interesting past and has done a lot over the years.  We hope this episode lets you in on opportunities come when you're uncomfortable!  You just never know where they might lead you.  Have a great week!   Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where can you find Ron?    On Instagram @Keypointfabrication  On the net at Keypointfab.com    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
6/21/20211 hour, 18 minutes, 44 seconds
Episode Artwork

Disappointment

Thank you for listening to episode 247 of the Welding Tips and Tricks Podcast!  For this week's episode we answer a question we received from one of our Patrons.  This question gets a little on the real side of the industry, that being how do you deal with disappointment?  We thought this was a good question to talk about because it is a topic that doesn't get talked about often.  Mostly we see all the good but we don't see much of the rougher saids.  We hope that some of you needed to hear what we had to say and it might help.  Have a great week!       Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
6/14/202152 minutes, 47 seconds
Episode Artwork

Jody O Neill @JTwonable

Thank you for listening to episode 246 of the Welding Tips and Tricks Podcast!  For this week's guest we had a fun conversation with @JTwonable, aka Jody O Neill.  Jody has a very interesting story and a few twists that might surprise you, too.  If you're not following Jody, please stop now and go follow, you will not be disappointed!  We hope you enjoy this week's chat with Jody and have a great week!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where can you find Jody?   On Instagram @JTwonable   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
6/7/202155 minutes, 35 seconds
Episode Artwork

The Second $5000 Investment?

Thank you for listening to episode 245 of the Welding Tips and Tricks Podcast!  For this week's chat we reached out to our Patreon members and asked them for some topic questions.  They came through with a good amount of them so we picked one and ran with it.  The question being, after you've spent the first $5K on your business what would you buy for the next major purchases?  We hope this episode gives you a little idea of what we think and maybe what you should look into for your home shop or growing company!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
5/31/202155 minutes, 21 seconds
Episode Artwork

@Petty_Welding aka Drew Petty

Thank you for listening to episode 244 of the Welding Tips and Tricks Podcast!  For this week's guest we had a great conversation with @Petty_Welding aka Drew Petty.  Drew has an interesting background in the welding field which we dove rather deep into, pun intended, ha ha.  Hope you all have a great week and Enjoy this week's chat with Drew Petty!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
5/24/202159 minutes, 2 seconds
Episode Artwork

Mistakes

Thank you for listening to episode 243 of the Welding Tips and Tricks Podcast!  For this week's chat we talk about mistakes that we've seen, well at least that is what this topic was but we just let it roll where ever it wanted to.  We hope you enjoy this chat/topic and have a great week!      Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
5/17/202157 minutes, 29 seconds
Episode Artwork

Odd Materials

Thank you for listening to episode 242 of the Welding Tips and Tricks Podcast!  For this week's chat we talk about some of the odd materials we have worked with in our careers.  We hope this episode might help open your eyes to a few different types of materials that are common in different industries and makes you do some research outside of your normal welding world.  Thank you again for all your support and please share the show if you found value in this information!    Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
5/10/202156 minutes, 22 seconds
Episode Artwork

@LostSkills Sam Hagan

Thank you for listening to episode 241 of the Welding Tips and Tricks Podcast!  For this week's episode we have a fun chat with our guest @LostSkills, aka Sam Hagan.  This episode goes all over the place with Sam's past, trucks, skill sets, and much more.  We hope you enjoy this chat and have a great week!  Thank you for all the support and be sure to share the show with others!  It really does help!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.   Where can you find more about Sam Hagan?   On Instagram @Lostskills On YouTube at Lostskills   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!   
5/3/20211 hour, 1 minute, 27 seconds
Episode Artwork

Stick Electrodes

Thank you for listening to episode 240 of the Welding Tips and Tricks Podcast!  For this week we answer another question and this one is all about Stick Electrodes.  We talk about amperage, uses, storage, and more.  We hope you get some great tips out of this one!  We apologize for the rough audio.  Tried several different things to get a better connection but the internet was not on our side the night of recording.  Have a great week!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
4/26/20210
Episode Artwork

Stick Electrodes

Thank you for listening to episode 240 of the Welding Tips and Tricks Podcast!  For this week we answer another question and this one is all about Stick Electrodes.  We talk about amperage, uses, storage, and more.  We hope you get some great tips out of this one!  We apologize for the rough audio.  Tried several different things to get a better connection but the internet was not on our side the night of recording.  Have a great week!     Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
4/26/202157 minutes, 41 seconds
Episode Artwork

What made you better?

Thank you for listening to episode 239 of the Welding Tips and Tricks Podcast!  For this week's episode we answered another question we received from our DM's on Instagram.  What are some things that happen to us in our careers that made us a better welder or better person?  We thought this was an interesting question and just let it roll.  We hope this episode helps you think back over your career and remember the things that change you along the way.  Thank you for the support!  Enjoy   Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
4/19/202153 minutes, 10 seconds
Episode Artwork

Remove the Mill Scale

Thank you for listening to episode 238 of the Welding Tips and Tricks Podcast!  For this week's episode we talked about Jody's most recent video about welding over Mill Scale.  This can be a very touchy subject depending on who you talk to and can be a rather deep topic, so we just started the conversation and let it go where it wanted.  Hope you're able to pick up a few good tips in this one that can help you along the way!      Thank you Mag-Tools.com for sponsoring this week's episode!  Check out all the great products Mag Switch offers and be sure to use code WTTP at check out for 10% off!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
4/12/202143 minutes, 42 seconds
Episode Artwork

Repost of Barbie the Welder Episode 43

Thank you for listening to this week's episode of the Welding Tips and Tricks Podcast!  This week we were not able to record a new episode but still wanted to post something fun for you to kick off the week.  We thought it would be good to dig out of the archive episode 43 where we talked to Barbie the Welder!  This was almost 200 episodes ago so the audio is... okay but the story is great!  We hope you're able to pull out a few good nuggets even if this is the second time you've heard it!  Thank you for all the support and understanding!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
4/5/20211 hour, 11 minutes, 33 seconds
Episode Artwork

Starting a business, Should I go to school first?

Thank you for listening to episode 237 of the Welding Tips and Tricks Podcast!  For this week's chat we answer/talk about a question we received over email.  The question was should they go to school before opening their own welding company.  This question has many different avenues that it could go down and we took a few.  If you're thinking of starting a company in the future we hope this ep might help you answer this question.  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/29/202155 minutes, 37 seconds
Episode Artwork

Hardest Weld Test

Thank you for listening to episode 236 of the Welding Tips and Tricks Podcast!  For this week's chat we had a question come in from a listener asking what was the hardest weld test we've ever taken or administered.  We thought this was an interesting question and ran with it.  Hopefully this will make you think back to your hardest tests or might give you a little insight to what you might run into when you get a new job.  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/22/20211 hour, 7 minutes, 3 seconds
Episode Artwork

Shop Lighting with @Fireballtool

Thank you for listening to episode 235 of the Welding Tips and Tricks Podcast!  For this week's chat we talk all about shop lighting.  We've all worked in dark dungeon shops and know it is not a good time.  To dive deeper into this subject we asked @Fireballtool, Jason Marburger, to join in to talk about how he is lighting his new shop!  Loads of great information was dropped in this episode!  Be sure to take some note!  Have a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/15/20211 hour, 14 minutes, 15 seconds
Episode Artwork

1/2-13 or 5/8 Through Hole

Thank you for listening to the episode 234 of the Welding Tips and Tricks Podcast!  This week's topic we found in the Welding Tips and Tricks Forum and thought it was interesting.  1/2-13 or Through Hole Fixture Plates?  Which is the best option?  We talk a lot about Roy's Crummy plates but there are other options out there and sometimes even just a plate with no holes might be the way to go.  If you're on the fence on getting a fixture plate of some kind in your shop, we hope this episode helps give you that extra push either way.     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/8/202142 minutes, 40 seconds
Episode Artwork

Being Prepared

Thank you for listening to episode 233 of the Welding Tips and Tricks Podcast!  For this week's chat with everything going on in the recent past few weeks we thought it would be a good idea to talk about being prepared.  This conversion went from being prepared in life to being prepared in business.  We hope this episode might help you think about some of the time you should do to prepare yourself or your business for those crazy times that seem to be coming up more often these days.     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
3/2/202151 minutes, 58 seconds
Episode Artwork

Pot Metal

Thank you for listening to episode 232 of the Welding Tips and Tricks Podcast!  For this week's topic we talk about welding Pot Metal.  What is pot metal?  How to identify it?  Can you weld it?  These are a few items we talked about during this conversation.  We hope that this chat will help you next time someone brings you something to repair and you suspect it might just be pot metal.  Have a great week everyone and Thank you for the support!     This episode is sponsored by ISOTunes.com   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/22/202145 minutes, 4 seconds
Episode Artwork

Cracks with Tim Luskin @TimWelds

Thank you for listening to episode 231 of the Welding Tips and Tricks Podcast!  Last week's ep we talked about defects in welds and at the end we brought up Cracks.  We thought this would be a good topic to have it's own episode.  To add into the chat we asked Tim Luskin to join in.  Tim, also known as @TimWelds, has an interesting background when it comes to cracks.  We hope that this chat helps you dive a little deep into why your weldments might be having some issues and also might help with identifying issues before you even start your parts!  Enjoy!    This episode is sponsored by ISOTunes.com   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/15/20211 hour, 12 minutes, 56 seconds
Episode Artwork

Defects and Discontinuities

Thank you for listening to episode 230 of the Welding Tips and Tricks Podcast!  For this week's episode we're talking about common defects and discontinuities seen in welds.  This chat was sparked from a post Roy put up on Instagram of a Lack of Fusion in one of his test pieces.  There are many reasons why you might get one of these defects we talk about in this episode and this is a very deep topic.  We hope this episode sparks something within you to do some testing and see if you're getting any common defects in your welds that you might not know of.  Thank you for all the support and have a great week!  Enjoy!    This episode is sponsored by ISOTunes.com   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
2/8/202157 minutes, 8 seconds
Episode Artwork

4130 Cluster Joint Kit

Thank you for listening to episode 229 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about @overkillracingandchassis aka Joel Bushmann's 4130 cluster joint kits.  We think this is a great learning tool and wanted to touch on some of the common topics discussed while welding 4130.  If you have never had a chance to weld this material, here is your chance!  We hope this episode helps answer a few questions and pushes you to try something a little different!  Have a great week!     This episode is sponsored by ISOTunes.com   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Unobtainium Welding, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Smith Industries, CR Fabrication, Kenny Miksch, Danny Vallee, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
2/1/202150 minutes, 12 seconds
Episode Artwork

Short Circuit vs Spray

Thank you for listening to episode 228 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about Short Circuit Mig vs Spray Mig.  The Good, The Bad, and The Ugly.  This is a very broad topic but as always we're trying to open the conversation and see where it might lead.  Hopefully this will make you ask yourself or your employer a few questions about why and or how you could improve your processes.  Thank you for all the support and have a great week!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
1/25/202154 minutes, 50 seconds
Episode Artwork

Fusion vs Depth of Fusion

Thank you for listening to episode 227 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about something we are asked often and have been wanting to do for a long time, Fusion vs Depth of Fusion.  This is a deep subject that can get a little heated at times, similar to Push vs Pull.  We hope that this conversation helps you think more about what is really going on under the puddle and maybe makes you want to do some testing to really see.  A simple cut and etch test can really open your eyes to what is going on.  Thank you for all the support and have a great week!!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
1/18/20211 hour, 2 minutes, 23 seconds
Episode Artwork

Starting Out Consumables

Thank you for listening to episode 226 of the Welding Tips and Tricks Podcast!  For this week's episode we had a listener call our voicemail box and asked if we could talk about Consumables you might need to have on hand when starting a new side gig or setting up a small shop at home.  We thought this was an interesting question and ran with it.  We hope that this episode helps you if you're working on your home shop or starting a small side hustle!  Thank you for all the support!!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
1/11/20211 hour, 3 minutes, 44 seconds
Episode Artwork

Looking ahead for 2021

Thank you for listening to Episode 225 of the Welding Tips and Tricks Podcast!  Happy New Year!  Today is the first day of 2021 and sticking with tradition we're talking about what we would like to see happen in the upcoming year.  We hope this episode helps you take a few minutes to stop and think about what you'd like to see happen in your year!  Thank you for all the support and we're looking forward to what this year holds for us and the podcast!  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!       
1/4/20211 hour, 2 minutes, 58 seconds
Episode Artwork

2020...

Well... It's here... After a crazy year it is coming to an end and sticking with tradition this week's episode is our 2020 Year End Wrap Up!  We talk about how this year was along with a few other things.  Some good things have happened this year and some bad things have happened this year.  Needless to say this year did not go as planned but could it have been?  We hope you take some time and look back over your past year and see where you could have changed things, or where you overcame and accomplished things you didn't think you could.  We hope you had a great year and have big plans for next year as it will be here in a blink!    Here's to 2020!  Don't let the door hit you on the way out!  I'd like to see the terms and conditions to 2021 before signing anything, ha ha!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!   
12/28/20201 hour, 2 minutes, 14 seconds
Episode Artwork

@Hill_Welding aka Austin Hill

Thank you for listening to episode 223 of the Welding Tips and Tricks Podcast!  For this week's episode we have a special guest, @hill_welding aka Austin Hill.  Austin is an amazing welder in the automotive industry and you might be surprised to hear his story.  If you're starting out in the welding industry we hope this episode sparks a fire within you that will push you to the next level.  Have a great week everyone!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
12/21/202050 minutes, 26 seconds
Episode Artwork

It's a Trap!

Thank you for listening to Episode 222 of the Welding Tips and Tricks Podcast!  For this week's chat we talk about when is a good time to spend some money and when should you hold on to it.  With the end of the year coming up sometimes it's a good idea, tax wise, to spend some money, and sometimes not.  Are sales really worth it?  We go over all these things in this conversion.  We hope this episode helps you with how you end your year and maybe help how you go into next year with your banking thoughts.  Have a great week!  Enjoy!  If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!   
12/14/202049 minutes, 12 seconds
Episode Artwork

General Maintenance

Thank you for listening to episode 221 of the Welding Tips and Tricks Podcast!  We're Back!  Hope everyone had a great Thanksgiving holiday with your family and friends!  We enjoyed our little break but are back at it with a new episode.  This week we are replying to a DM we received on Instagram about Regular Maintenance you could think about in your shops.  This is something that is very important but is often looked past.  We hope this episode sparks something in you to take some time and oil up your tools, wipe down your machines, clean off your tables, and much more.  It might take you a few minutes each week but will be well worth it in the long run!  Thank you for all your support and have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!   
12/7/202057 minutes, 8 seconds
Episode Artwork

Unconventional

Thank you for listening to episode 220 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about unconventional welding styles.  We started off with some of the things we have done in our careers which lead into some of the things we have seen and so on.  We hope you enjoy this episode and it sparks a few thoughts in your head about the things you've done or ideas of things you could do in the future!  Have a great week and Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!   
11/23/202041 minutes, 39 seconds
Episode Artwork

Welding Aluminum

Thank you for listening to episode 219 of the Welding Tips and Tricks Podcast!  For this week's episode we talk more about welding Aluminum.  In past episodes we talked about basic Tig welding aluminum (ep 163) but we wanted to expand on that more and talk about some different processes.  We hope this episode helps you think about different options that could be used in different scenarios.  Have a great week!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!    
11/16/202054 minutes, 18 seconds
Episode Artwork

Top 3 Things You Should Know Getting Into Welding

Thank you for listening to episode 218 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about the 3 things we each think you should know about welding when you're getting into the trade.  If you're new to this industry you'll want to really pay attention and if you're a seasoned welder see if you agree with what we think.  Also, for those seasoned welders listening what would you say?  It's interesting to think about.  We hope you enjoy this episode and have a great week!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
11/9/202032 minutes, 6 seconds
Episode Artwork

Weld Inspection Tools

Thank you for listening to episode 217 of the Welding Tips and Tricks Podcast!  For this week's chat we talk all about weld inspection tools.  Some of these tools are general inspection and some are more official inspection tools.  Do you need them or don't you need them?  Listen to find out what we think.  Hope everyone has a great week!!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
11/2/202057 minutes, 40 seconds
Episode Artwork

Fireball Tools and JD Brewer

Thank you for listening to Episode 216 of the Welding Tips and Tricks Podcast! For this week's episode we had a fun conversation with Jason Marburger from Fireball Tools and JD Brewer from Apex welding. We didn't really have any topic, just wanted to catch up with these two and see where the conversation went. We hope you enjoy this episode and are able to pick out a few tips and tricks along the way! Have a great week everyone! Enjoy!       If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
10/26/20201 hour, 13 minutes, 53 seconds
Episode Artwork

Stick vs Mig

Thank you for listening to the Welding Tips and Tricks Podcast!  For this week's episode we answer another question we get often.  Which is stronger, Stick or Mig?  Now we're not metallurgists by any means so this is just a conversation between a few welders...  We hope this conversation gets you thinking about the process you're doing and why you might be doing that one over another.  We enjoy answering questions like this so please be sure to send us your questions!  Thank you Jared for this one!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
10/19/20201 hour, 2 minutes, 44 seconds
Episode Artwork

Listeners Question, Part 2

Thank you for listening to episode 214 of the Welding Tips and Tricks Podcast!  For this week's episode we are doing Part 2 of the question we received from Andrew last week.  This part of the question is mainly based on whether the current machines he has are good enough to get started.  We started with this and just let the conversation flow from there.  Hope you enjoy this week's chat and have a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer, Ryan Shelley.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
10/12/202049 minutes, 36 seconds
Episode Artwork

Listener Sent in Question

Thanks for listening to Episode 213 of the Welding Tips and Tricks Podcast!  For this week's chat we answer part of a question we got from a listener.  Andrew asked a few questions about starting his own business.  We ended up talking mostly about certifications in this episode but will have a part 2 coming up to answer the rest of the questions.  If you have any questions you'd like to hear answered be sure to shoot us a DM or Email!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding! 
10/5/20201 hour, 1 minute, 9 seconds
Episode Artwork

Corded vs Battery

Thank you for listening to Episode 212 of the Welding Tips and Tricks Podcast!  For this week's conversion we talk about Corded vs Battery tools!  Being welders we're always being tasked with doing way more than just welding and we wanted to talk about our thoughts on which is better to invest in and why we think so.  This is just our general thoughts and something to keep in mind when you're looking into outfitting your shop or rig with tools!  We hope you enjoy this week's chat and have a great week!!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!
9/28/202050 minutes, 22 seconds
Episode Artwork

Smith Industries Mike Smith

Thank you for listening to episode 211 of the Welding Tips and Tricks Podcast!  For this week's conversation we talk with Smith Industries, owner Mike Smith, @smithidustries007 on Instagram.  We asked Mike about how he got into the field and what has it been like running your own company along with many other topics!  We hope you get a few laughs out of this one and also pick up a few great tips!  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you find Mike?   On instagram @smithindustries007   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
9/21/202054 minutes, 10 seconds
Episode Artwork

Favorite Side Gig Jobs

Thank you for listening to Episode 210 of the Welding Tips and Tricks Podcast!  For this week's chat we talk about some of our favorite and not so favorite side hustle jobs we've had.  We hope this conversation brings you back to some of your beginning jobs that helped you along the way!  Have a great week everyone!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
9/14/202050 minutes, 6 seconds
Episode Artwork

Replay of Episode 1

Thank you for listening to Episode 209 of the Welding Tips and Tricks Podcast!  This week's episode is going way back to revisit episode 1.   We were not able to record this past week just because we all we're busy or traveling.  We thought it would be fun though to repost Episode 1 and hear where the podcast started.  Hopefully, you hear a change in the audio quality since then.  We've learned a lot along the way.  Hope everyone is having a great holiday week!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated.    This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Welders for Welders so that you can listen to Welders talk about Welding while you're Welding!  
9/10/202030 minutes, 25 seconds
Episode Artwork

Starting you Mobile Rig

Thank you for listening to episode 208 of the Welding Tips and Tricks Podcast!  For this week's conversation we take a stab at answering a question we get very often.  What should I buy for my first mobile setup?  This is a very deep subject and also very personal to every situation.  We hope this might answer a few of your questions and also gets you thinking about different options that might be available to you that you didn't think of to get you started!  Have a great week everyone and Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Veteran Welding Co, Rick's Welding Service, David Doherty, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Scott Tasso, Anthony Chrisomalis, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Andy Katanic, S&S Metal Fabrication, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
8/31/202043 minutes, 55 seconds
Episode Artwork

You want me to do What?

Thank you for listening to episode 207 of the Welding Tips and Tricks Podcast!  For this week's conversation we talk about how you handle a situation where you're being asked to do something that isn't right?  We've all had different things come up in our careers when a boss has asked us to do something or a job has gone sideways, what did we do in those situations?  We hope you never have those scenarios come up but if they do we hope this episode helps you.  Have a great week!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
8/24/202047 minutes, 33 seconds
Episode Artwork

Calculated Risks and Gambling

Thank you for listening to episode 206 of the Welding Tips and Tricks Podcast!  For this week's topic we chat about taking Calculated Risks and Gambling within your business and careers.  We tried to be very broad and cover a lot of ground so it could apply to as many people possible.  We hope you're able to pull out some tips from this one to help you along your way.  Have a great week!  Enjoy     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
8/17/202052 minutes, 49 seconds
Episode Artwork

How to Organize Jobs with Nick Bezates

Thank you for listening to episode 205 of the Welding Tips and Tricks Podcast!  For this week's topic we asked @bezatesn, aka Nick Bezates, to join us and give us some insight on his experiences.  This topic is How to Organize Jobs.  If you're running your own company or side gig and things are starting to fill up what are some of the things you need to do to keep everyone happy and keep the work flowing?  This is what this week's talk is about along with a few other turns.  We hope you enjoy this one and are able to pull out a few good nuggets of information!  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you find Nick?   On Instagram @Bezatesn     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
8/10/202050 minutes, 4 seconds
Episode Artwork

What does a Welder Do?

Thank you for listening to episode 204 of the Welding Tips and Tricks Podcast!  For this week's episode we thought it would be interesting to talk about, what does a welder do?  Jody was looking up some tag words online and this question came up a few times so it is something that is searched often and we thought it might be a good topic for someone getting into the trade!  Hope everyone has a great week!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
8/3/202045 minutes, 9 seconds
Episode Artwork

Mark Winchester Winchester Metal Works

Thank you for listening to episode 203 of the Welding Tips and Tricks Podcast!  For this week's conversation we had a fun chat with the one and only @winchestermetalworks, aka Mark Winchester.  If you're wanting to up your aluminum welding game Mark is your guy!  We talked about how Mark got into welding and the path that lead him to his solid knowledge base!  We hope you're able to pick up a few of the great tips laid out in this episode and they help you take you to the next level!  Have a great week everyone!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you find Mark?   On the Web at  winchestermetalworks.com On Instagram @winchestermetalworks   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
7/27/202041 minutes, 44 seconds
Episode Artwork

Revisit with @Deepsouthdimestacker aka Brad Goodman

Thank you for listening to episode 202 of the Welding Tips and Tricks Podcast!  For this week's guest we have a revisit with @Deepsouthdimestacker, aka Brad Goodman.  We talked with Brad on episode 171 and wanted to catch up with him to see how things have changed in his business and skill set.  If you haven't listened to ep 171 be sure to give that a listen first!  Thank you to all of you that support the podcast with your listens!  It means a lot to us!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform you're listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you find Brad?   On Instagram @deepsouthdimestacker    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
7/20/20201 hour, 9 minutes, 29 seconds
Episode Artwork

Not going the way I Planned...

Thank you for listening to Episode 201 of the Welding Tips and Tricks Podcast!  For this week's topic we talk about something that we all never want to deal with... When a job goes bad...  What have we done in the past and we hope this episode will help you if you find yourself in that scenario.     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!
7/13/202050 minutes, 57 seconds
Episode Artwork

The Big Move

Thank you for listening to episode 200 of the Welding Tips and Tricks Podcast!  It has been a wild ride these past 200 episodes and we were not really sure what direction to take this episode.  With Jonathan just moving his family and business across the country we thought we'd go down the road with what was that like and what are some of the details that went into this big move.  If you're looking at moving to a new location you'll want to take some good notes!  Thank you to all of you that listen each week.  Without your support listening we would not have a podcast!  We enjoy doing this but it means the world to us that it is helping you in some way!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
7/6/202047 minutes, 18 seconds
Episode Artwork

Sunstone Welders

Thank you for listening to episode 199 of the Welding Tips and Tricks Podcast!  For this week's guests we have Scott Peart and Alex Warner from Sunstone Welders on to talk about the interesting products they provide our community.  When you first hear Micro Welding you probably think only super niche markets need such things but after this conversation with Scott and Alex it really opened our eyes to the possibilities of these machines in every job shop!  We hope you have that same Ah Ha moment while listening to this episode too!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you get a hold of Sunstone Welders?   On the web at www.sunstonewelders.com On Instagram @Suntstoneweld On the phone at 1-801-658-0015   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   
6/22/202057 minutes, 26 seconds
Episode Artwork

Art Kleppen Founder of CK Worldwide

Thank you for listening to episode 198 of the Welding Tips and Tricks Podcast.  For this week's guest we had a fun conversation with Art Kleppen the founder of CK Worldwide.  It was really interesting hearing how a brand that we all use and enjoy came to life.  Also, learned of something new coming out that you can personally get your hands on just from listening to this episode!  We hope you enjoy this week's conversation and have a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   How do you get your own CK EZ Dabr?   Email [email protected] and be sure to tell them you heard it here on the Welding Tips and Tricks Podcast!     Also, be sure to checkout www.CKWorldwide.com  to see all the great products they offer our community!     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
6/15/20201 hour, 3 minutes, 49 seconds
Episode Artwork

Just a Chat

Thank you for listening to episode 197 of the Welding Tips and Tricks Podcast! For this show we thought it would be a little different for us to just have a Chat. Kind of like the After Show. We didn't have a topic and all could use a little time to just talk and see what came up. We hope this episode is just what you needed too. Nothing too crazy just general conversation about life and welding. We hope you enjoy this different episode and everyone a great week!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   
6/8/202057 minutes, 13 seconds
Episode Artwork

Demoise Welding and Fabrication

Thank you for listening to episode 196 of the Welding Tips and Tricks Podcast!  For this week's guest and chat we catch up with @ddemoise, aka David Demoise.  We had David on a little while ago but since then a few things have changed for his company.  We talk about how those changes are going for him along with much more!  Hope you enjoy this episode and helps grow that fire to start your own company!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you find David? On Instagram @DDemoise   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
6/1/202056 minutes, 31 seconds
Episode Artwork

Tools you should have starting out

Thank you for listening to episode 195 of the Welding Tips and Tricks Podcast!  For this week's chat we revisit some of the tools you should have when you start out in this trade.  Last time we talked about this was episode 4 so it's been awhile...  We start with the tools you need and just kind of let the conversation flow where ever it wanted to go.  Hope you're able to pull out some good nuggets of information to put to good use!  Have a great week everyone!  Enjoy.    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
5/25/202056 minutes, 20 seconds
Episode Artwork

Things you thought you knew...

Thank you for listening to episode 194 of the Welding Tips and Tricks Podcast!  For this week's topic we talk about the things we thought we knew.  Meaning just some of the things that caught us off guard and changed the way we welded or looked at welding in whole.  We hope this episode helps you think about the times you've had when you saw something new or told something that completely changed how you weld.  Have a great week!  Enjoy! If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   
5/18/20201 hour, 4 minutes, 13 seconds
Episode Artwork

Justin Voss

Thank you for listening to episode 193 of the Welding Tips and Tricks Podcast!  For this week's guest we had Justin Voss join us.  If you have never heard of Justin look him up on YouTube and Instagram.  You wont regret it!  Have a great week everyone!  Hope you enjoy this week's chat with Justin Voss.                                                                                                                                          If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where can you find Justin?   On YouTube at  Justin Voss On Instagram @JustVoss On the Web at JustVoss.com   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
5/11/20201 hour, 14 minutes, 58 seconds
Episode Artwork

Pricing Jobs

Thank you for listening to episode 192 of the Welding Tips and Tricks Podcast!  For this week's topic we revisit a conversation we had a long time ago on episode 6 about Pricing Jobs.  It has been a few years since then and a very common question we get so we hash out a few ideas, processes, and different things you should think about while pricing a job.  We hope you get a few tips out of this episode and put them into practice.  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
5/4/20201 hour, 10 minutes, 6 seconds
Episode Artwork

Stubby 22 Test Fixtures

Thank you for listening to this week's Stubby Episode.  For this Stubby Crummy answers a few questions about Test Fixtures.  These are items commonly used in some industries and not in others.  We've been getting many questions asking what are they, what are they used for, and why, so here's a short answer to those questions.  We hope you enjoy this Stubby and have a great rest of your week!     If you would like to hear a question you have answered on a Stubby episode please send them to [email protected] or shoot us a DM on Instagram @weldingtipsandtrickspodcast!  
4/29/20208 minutes, 58 seconds
Episode Artwork

John Malecki

Thank you for listening to episode 191 of the Welding Tips and Tricks Podcast!  For this week's guest we had a great conversion with John Malecki.  If you are a fan of the Maker Community as we are you know of John.  If you're new to it you're in for a treat! John has a very interesting background and brings a lot to the table with running a Podcast, Content Site, Custom Furniture company, YouTube Channel, and more.  We picked John's brain a little then just sat back and took notes.  We hope you'll be doing the same thing while listening to this one!  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.       Where can you find John?   On Instagram @John_Malecki On the Web at https://www.johnmalecki.com/ On YouTube at John Malecki   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
4/27/20201 hour, 2 minutes, 48 seconds
Episode Artwork

Stubby 21 Budgeting for your first machine

Thank you for listening to this week's Stubby Episode!  Jonathan answers a question we get often about budgeting your first setup.  We hope this stubby answers a few questions you might have and leads you down the road to purchasing your first welding machine.   Enjoy   If you have a question that you would like to hear us answered on a Stubby episode be sure to send them to [email protected] or shoot us a DM on instagram @weldingtipsandtrickspodcast!  
4/22/20207 minutes, 40 seconds
Episode Artwork

Questions with Sidni Hinesley from Georgia Trade School

Thank you for listening to Episode 190 of the Welding Tips and Tricks Podcast!  This week's episode is a little different.  Sidni Hinesley from Georgia Trade School joined us to ask us a few questions she has been asked from students and other alumni.  Normally we do the asking but this time the script is flipped.  We hope you get a few good tips out of this episode and have a great week!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Sidni and Georgia Trade School?   Online at http://www.georgiatradeschool.com/     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
4/20/20201 hour, 19 minutes, 13 seconds
Episode Artwork

Stubby 20 What is it like to be in Aerospace

Thank you for listening to this week's Stubby episode!  Jody answers a question about what is it like to be in the Aerospace Industry.  He touches on some of the good and bad parts in this Stubby.  We hope this give you a little taste into the interesting world of Aerospace.  Thank you for all your Support and hope everyone is staying safe and healthy!  Enjoy!   If you have a question that you would like to hear answered on a Stubby be sure to send them to [email protected] or shoot us a DM on Instagram @weldingtipsandtrickspodcast.  
4/15/202011 minutes, 7 seconds
Episode Artwork

Revisit to Books and Podcasts

Thank you for listening to Episode 189 of the Welding Tips and Tricks Podcast!  For this week's episode we thought it would be a good time to revisit the books and podcasts we like to listen to to help inspire us or just gain different types of knowledge.  We hope that this episode might help you look outside the normal and try some different things.  Hope everyone is staying healthy and safe during these crazy times.  Have a great week. Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
4/13/202049 minutes, 39 seconds
Episode Artwork

Stubby 19 When to Start a Business

Thank you for listening to this week's Stubby Episode!  Jonathan answers a question we get often about when is it a good time to start a side hustle and when should you turn that into an actual company.  We hope this Stubby answers a few questions you might have about your side gig and might spark the fire to help grow it.     Have a great week and stay safe out there!     If you have a question that you'd like to hear answered for a Stubby be sure to send them to [email protected] or shoot us an DM on Instagram @weldingtipsandtrickspodcast.  
4/8/20207 minutes, 3 seconds
Episode Artwork

To use a Gas Lens or Not to use a Gas Lens...

Thank you for listening to Episode 188 of the Welding Tips and Tricks Podcast! For this week's episode we answered a question that we got about When is it a good time to use a Gas Lens and When shouldn't you use one.  We let this question just flow where ever it wanted to and hope it answers your questions along the way!  If you have a question you'd like to hear answered send them to us!  Have a great week!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
4/6/202050 minutes, 14 seconds
Episode Artwork

Tig_Happens aka Johannes Ciobanica

Thank you for listening to episode 187 of the Welding Tips and Tricks Podcast!  For this week's episode we had a fun chat with @Tig_Happens aka Johannes Ciobanica.  We had a good time talking about the differences in the welding industry in Italy, where Johannes is located, along with many other things.  We hope you get a few good takeaways from this episode.  We sure did.  Have a great week!  Enjoy.   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Johannes?   On Instagram @Tig_Happens   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
3/30/202050 minutes, 52 seconds
Episode Artwork

Using this time to improve your company

Thank you for listening to episode 186 of the Welding Tips and Tricks Podcast!  For this week's episode we're doing something a little different because of everything that is going on in the world, we wanted to take some time to talk about how/what we're doing to help our business and lives during these times.  We hope this episode helps you think about what you can do and come out ahead when all this passes!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
3/24/202049 minutes, 27 seconds
Episode Artwork

Weld Coupons and Drills

Thank you for listening to episode 185 of the Welding Tips and Tricks Podcast!  For this week's episode we talk about the importance of weld coupons and practice coupons.  Some of the drills that you're told to do can seem very pointless and boring but we tried to explain why these drills can be very helpful in the long run.  We hope you pick up some material for your self to work on and improve your skills!  Enjoy     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
3/23/202056 minutes, 41 seconds
Episode Artwork

Welding Tips and Tricks Forum

Thank you for listening to Episode 184 of the Welding Tips and Tricks Podcast!  For this episode we had a fun time talking about the Welding Tips and Tricks Forum.  For many of us this is where our welding community started in the WT&T Forum or others similar to it.  There is still a wealth of knowledge available on these sites if you have never looked into them.  We hope this topic gives you the push to take some time and join a forum and join in the conversations.  It's all about passing on the information we have along with learning new things from others!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
3/16/202051 minutes, 24 seconds
Episode Artwork

Stubby 18 Making the Jump

Thanks for listening to this week's Stubby episode.  Last week we got a DM talking about making the jump to running your own business and how we always talk about playing it safe.  Jonathan took this question and ran with it.  Talks about the numbers and a few other things that you should really think about before taking that step out of the plane.  Again we are not business advisers or anything along those lines.  We're just fellow welders trying to help and give sound advice to the things we know from our experiences.  With that we hope you enjoy this weeks Stubby!     If you have a question you would like to hear answered on a Stubby episode be sure to send them to [email protected] and we'll catch you next time!  
3/11/202015 minutes, 6 seconds
Episode Artwork

Cut and Etch Tests

Thanks for listening to episode 183 of the Welding Tips and Tricks Podcast.  For this week's topic we talked about Cut and Etch testing.  This can be a very handy and sometimes easy way to see just what is really going on inside your welds.  If you've never had a chance to try doing this we hope that this episode give you some insight on how it's done and possibly sparks an interest in you to do some your self.  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Brandon Parry, Eli Latin, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
3/9/20201 hour, 3 minutes, 18 seconds
Episode Artwork

Stubby 17 Tig Torch Sizes and Consumables

This weeks Stubby episode came from the Welding Tips and Tricks Forum page.  Question asked about Tig torches sizes and consumables.  We hope this helps answer the question and might lead you to stock up on the different types of torches available.  Have a great week! If you have a question that you would like to hear answered on a Stubby episode be sure to send it in to [email protected] or shoot us a DM on Instagram!  
3/4/20207 minutes, 10 seconds
Episode Artwork

Dabswellington aka Little Dabbie, Dabsalot, or Sean Flottmann

Thank you for listening to episode 182 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a fun conversation with the one and only @dabswellington aka Sean Flottmann.  If you've never heard of Little Dabbie you've been living under a rock!  Sean does some amazing Tig welded metal art along with is a very skilled fabricator.  We hope you enjoy this conversation as much as we did recording it!  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where can you Find Dabs?    On Instagram @Dabswellington    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
3/2/202053 minutes, 32 seconds
Episode Artwork

Stubby 16 Tig Cups

Thank you for listening to this week's Stubby episode!  Jody answered this question about Tig cups.  We hope that after you listen to it you have a better understanding of the different types of cups and possibly where to find them.  Enjoy!     If you would like to have your question answered for a Stubby be sure to send or questions to [email protected]!
2/26/20207 minutes, 56 seconds
Episode Artwork

Pivot Points

Thank you for listening to episode 181 of the Welding Tips and Tricks Podcast!  For this weeks episode we had an interesting time talking about the different pivot points of our careers.  If you have been at this game for a while it's fun to think back to all the changes you've gone through and wonder where you would have ended up if one thing had changed along the way.  We hope you enjoy this chat and have a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.       Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
2/24/202047 minutes, 2 seconds
Episode Artwork

Stubby 15 Busting at the Seams

Thanks for listening to this weeks Stubby episode!  Jonathan answers a question about what to look for when growing your shop/building.  Hope it helps!  Enjoy   If you have a question you'd like to hear answered on a Stubby episode be sure to shoot us an email at [email protected]!  Could hear your question next time!  
2/19/20209 minutes, 4 seconds
Episode Artwork

Should I sell my old machine for a new one?

Thank you for listening to episode 180 of the Welding Tips and Tricks Podcast!  A few weeks ago Roy posted a video asking our listeners for questions and topics.  You guys gave us some really great ideas.  For this weeks topic we snagged one of your questions and ran with it!  We hope this episode helps you answer the same question!  Have a great week!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.       Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
2/17/202043 minutes, 33 seconds
Episode Artwork

Stubby 14 What Tig Machine is for Me?

For this weeks Stubby Roy talks about a question he gets very often,  What Tig machine should I buy?  We hope that this stubby helps you think about what machine will work best for you.  Have a great week!    If you have a question for us to answer in a Stubby episode please send them to [email protected].  Thank you!  
2/12/20207 minutes, 48 seconds
Episode Artwork

I think I'm Fired...

Thank you for listening to episode 179 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a fun time reminiscing about times when we thought we might have been fired or something we saw might have got someone fired.  We're human and things happen but it's up to others to judge the outcome.  We hope you enjoy hearing our failures and be a good reminder to slow down and think about what you're working on.  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.       Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
2/10/202054 minutes, 47 seconds
Episode Artwork

Stubby 13 Amp Controllers

For this weeks Stubby Jonathan talks more about Amp Controls for Tig torches.  We get asked all the time what is the best kind.  Hopefully this will help you understand the different kinds that are available and help you pick what might be best for you!  Enjoy!   If you have a question for us to answer in a Stubby episode please send them to [email protected].  Thank you!
2/5/20208 minutes, 53 seconds
Episode Artwork

Bob Moffatt

Thank you for listening to the Welding Tips and Tricks Podcast episode 178.  For this weeks episode we had a fun conversation with the one and only Bob Moffatt.  We talked all about what got him into welding, how he got into teaching, how things have changed over the years, and more.  We hope that you enjoy this chat and if you're new to the industry take some notes!  Have a great week! Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Where can you find Bob?   On Instagram @ram_nation58   Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
2/3/20201 hour, 10 minutes, 38 seconds
Episode Artwork

Hitting your Weld Size

Thank you for listening to episode 177 of the Welding Tips and Tricks Podcast! For this weeks topic we talk all about how to hit a weld size.  There is a lot to think about when you're wanting to hit a specific size of weld.  What are some of the things that can effect that?  We touch on a lot of different things and also take a few trips down a couple rabbit holes.  We hope you enjoy this episode and it helps you next time you have a called out size on your prints.  Enjoy.     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC, Jacob B Schaeffer.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL (Currently out of XL)   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
1/27/202056 minutes, 16 seconds
Episode Artwork

Joe Lynch from @Lynchsmetalfab

Thank you for listening to episode 176 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a great conversation with Joe Lynch from @lynchsmetalfab on Instagram.  Joe's story is a little different from most and really shows that just taking that first step is all you need to do to start the crazy ride of running your own company.  We hope you enjoy this episode and it might make that little fire inside you grow a little more to take your first steps, too.     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services, CAD-2-Fab, Weldworks LLC.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find more about Joe?   On instagram @Lynchsmetalfab On the Web at Lynchsmetalfab.com   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake  
1/20/202058 minutes, 41 seconds
Episode Artwork

Stubby 12 What do you look for when taking a weld test?

For this weeks Stubby Roy answers a question about what do you look for at a company when you're going into take a weld test.  Have you ever really thought about it?  Maybe after this one next time you're applying you'll put these tips to use!  We hope you enjoy this weeks Stubby!     Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
1/15/202010 minutes, 2 seconds
Episode Artwork

Looking ahead at 2020

Thank you for listening to episode 175 of the Welding Tips and Tricks Podcast!  For this weeks chat we take a look ahead at 2020 to see what we have planned and what we hope to see happen.  We hope you have taken a few minutes to really think about what you'd like to see in your world this coming year.  If not, maybe this episode will help you stop for a minute and think.  Have a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake
1/13/20201 hour, 2 minutes, 13 seconds
Episode Artwork

Stubby 11 Work Ethics

Thank you for listening to this weeks Stubby episode!  For this Stubby Jody is talking answering a question about Work Ethics.  We hope you're able to pull out a few good tips from this one that will help you in your career as a weldor or whatever trade you might be in!  Thank you for your support and be sure to share this podcast with your friends!  Enjoy!   Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
1/8/20208 minutes, 17 seconds
Episode Artwork

Re-post with Jason Hurst

Thank you for listening to episode 174 of the Welding Tips and Tricks Podcast!  For this episode we had a great conversation with Works By A Hurst aka Jason Hurst.  If you're not following Jason on his channels you're really missing out.  Jason is known for many things but most of all his sculpting and art work.  We talk about what got him into metalworking and where he sees it taking him in the future.  We hope you enjoy this episode and pick up a few great tips along the way. Thanks for listening everyone!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Jason?   On Instagram @worksbyahurst On the web at www.worksbyahurst.com On YouTube at Worksbyahurst On Patreon at Worksbyahurst   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!    New music brought to you by Jody's son Jake and Artlist.io
1/6/20201 hour, 7 minutes, 9 seconds
Episode Artwork

Looking back at the last Decade

Thank you for listening to episode 173 of the Welding Tips and Tricks Podcast!  Well, we made it to the end of 2019.  In all honesty it went by in a blink.  For this episode we thought it would be fun to take a look back at not only this past year but the past decade.  We hope this episode inspires you to do the same thing and look back at how much your life has changed in the past 10 years.  Are you happy with what you see?  Would you have changed anything?  These are what we asked each other.  Hope you have a great New Years and start off this next decade with a bang!  Enjoy!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
12/30/20191 hour, 7 minutes, 22 seconds
Episode Artwork

Stubby 10 Being Picked On

For this week's Stubby Jonathan answers a question about being picked on at work.  This is something that we all have dealt with either being new in the industry or sometime just being the new weldor in a shop.  Hope this sheds some light on the subject.  Enjoy! Disclaimer:  Just trying something a little different with the editing of this Stubby.  The music sounded like it would fit with a little tweaking.  Let us know what you think along with your next set of questions for future Stubby Episodes!   Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
12/25/20197 minutes, 47 seconds
Episode Artwork

Hearing Protection with Pete Murphy from ISOtunes

Thank you for listening to Episode 172 of the Welding Tips and Tricks Podcast!  For this week's episode we had a great conversation with Pete Murphy from ISOTunes about hearing protection.  This is something we always think about after the fact or sometimes not at all.  I know when we're young we think we do not need any protection but that comes as a cost as you get older.  Hope this episode helps you think about your hearing before you start you day at work, everyday!  Have a great week!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find ISOTunes?   On Instagram @ISOtunesaudio On the Web at www.ISOtunes.com On Amazon search ISOtunes for all their Hearing Protection Products   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
12/23/201947 minutes, 28 seconds
Episode Artwork

Stubby 9 Gas Flow Settings for TIG

For this weeks Stubby episode Jody talks all about Gas Flow Settings.  We're sure you'll pick up a few tips in this short episode!  Thank you for all your support and be sure to send in your questions to [email protected]. Enjoy! Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
12/18/20196 minutes, 22 seconds
Episode Artwork

Brad Goodman

Thank you for listening to Episode 171 of the Welding Tips and Tricks Podcast!  For this episode we had a fun chat with @deepsouthdimestacker aka Brad Goodman.  During this chat we covered a lot of ground from what got Brad into welding, running a business, fixing boats, and much more.  We hope you enjoy this chat as much as we did!  Thank you for listening and be sure to share the podcast with your fellow co-workers!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Brad?   On Instagram @deepsouthdimestacker    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
12/16/20191 hour, 21 minutes, 21 seconds
Episode Artwork

Stubby 8 Holding Tolerances

Thank you for listening to this weeks Stubby Episode of the Welding Tips and Tricks Podcast!  This weeks Stubby is about holding Tolerances.  If you lay beautiful welds and blow the dimensions you just made a nice looking piece of scrap.  Roy tells us a little more about his process when it comes to holding tolerances.  Enjoy   Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
12/11/20196 minutes, 44 seconds
Episode Artwork

Tig Brazing

Thank you for listening episode 170 of the Welding Tips and Tricks Podcast!  For this weeks topic we chat about Tig Brazing!  Jody recently posted a video of modifying a file into a knife and added a lot of Alumimun and Silicon Bronze to shape a handle.  We wanted to dive a little deep into this conversation and chat about the different types of Tig Brazing we have done and how we have done it best.  Hope you get a few good tips out of this one!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
12/9/201945 minutes, 18 seconds
Episode Artwork

Stubby 7 HR Questions with Sidni Hinesley

This week's Stubby was recorded live at Fabtech between Jody and Sidni Hinesley from Georgia Trade School.  The audio is a little rough but the content is great.  We hope you enjoy this Stubby and have great week!   If you would like to hear your question answered on a Stubby Episode be sure to send it to [email protected]  
12/4/20198 minutes, 53 seconds
Episode Artwork

Anodized Aluminum

Here is your First Listen to episode 169. For this weeks topic we went with a requested topic from our Live recording at Fabtech and we have also been asked to talk about this many times before. This topic is Tig welding Anodized Aluminum. There are many ways to weld this but we talk about the ways we have done it before in the past. Hope you can get some good tips from this one and when an anodized job comes across you bench you'll feel more comfertable of where to start. Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
12/2/201952 minutes, 43 seconds
Episode Artwork

Stubby 6 Quitting

Thank you for listening to this Stubby episode of the Welding Tips and Tricks Podcast!  For this weeks Stubby Jonathan answers a question about Quitting.  This is one that all of us have had to ask ourselves before sometimes more than once.  We hope that this Stubby might help you answer your questions abut quitting.     Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
11/27/20196 minutes, 25 seconds
Episode Artwork

Fabtech 2019 Review

Thank you for listening to the Welding Tips and Tricks Podcast!  For this weeks episode we review Fabtech 2019!  Now that the show is over we wanted to chat about what all we saw this year, who we met, what we bought, and more.  We hope you were able to make it and if not start planning to go to Fabtech 2020 Now!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
11/25/20191 hour, 11 minutes, 17 seconds
Episode Artwork

Stubby 5 Welding Tests in School

Thank you for listening to this weeks Stubby Episode!  This question is one we get often and thought it would be a good one to include for all to hear.  If you're in school for welding be sure to listen up!     Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
11/20/20196 minutes, 51 seconds
Episode Artwork

Fabtech 2019 Live

Thank you for listening to the Welding Tips and Tricks Podcast!  For this weeks episode we're posting our Live recording from Fabtech 2019.  We had a great time and was amazed how many people took time out of there Fabtech to come see us talk and answer their questions!  The audio quality isn't the best but better than we thought it would be.  Hope you enjoy this Live recording and have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
11/18/20191 hour, 23 minutes, 22 seconds
Episode Artwork

Stubby 4 Reading Blueprints and Welding Symbols

This weeks Stubby is about needing to be able to Read Blueprints and understand Welding Symbols?  This question comes from Charles Price who is a welding instructor at the Mayfield/Graves County Area Technology Center in Mayfield, KY.  Charles sent us a list of very common questions he gets from his students.  We hope you enjoy this short episode and look forward to hearing your questions!    Thank you to CK Worldwide for sponsoring this Stubby Episode!     If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!   If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
11/13/20196 minutes, 35 seconds
Episode Artwork

Weld Like a Girl aka Michelle Villalobos

Thank you for listening to Episode 166 of the Welding Tips and Tricks Podcast!  For this episode our guest is Weld Like a Girl aka Michelle Villalobos.  We had a great time chatting with Michelle hearing how she got into the trade along with many other things.  When running your own business you wear many hats and Michelle wears them all along with looking for new hats at the same time.  If you're wanting to start a business you'll want to take some notes!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsors for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!         We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Where can you Find Michelle?   On Instagram @weldlikeagirl    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
11/11/201952 minutes, 42 seconds
Episode Artwork

Stubby 3 Job Ad Wording

Thank you for listening to Stubby episode 3.  This Stubby is about Job Ads.  What to look for and what they might mean in their ads.  Also, Jody touches on a few good tips on what to say during an interview.  Enjoy!    Thank you to CK Worldwide for sponsoring this Stubby Episode!   If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!   If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!
11/6/20194 minutes, 45 seconds
Episode Artwork

Preheat for Fabtech 2019

Thank you for listening to episode 165 of the Welding Tips and Tricks Podcast!  Fabtech is Next week so we thought it would be a good time to do a Preheat Show.  We talk about what to expect and what all we have going on this year at Fabtech 2019.  It's going to be a great show but very busy too!  We look forward to seeing all of you there!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsors for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!         We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum     Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
11/4/20191 hour, 9 minutes, 51 seconds
Episode Artwork

Stubby 2 Tig Weld Test

Thank you for listening to the Stubby episode 2.  For this Stubby we answer a question from Brandon Perry about what do you do when you dip your tungsten during a weld test?  Is it a done deal or are there things you can do to save the test and still land the job.  Roy talks about how he has dealt with weld tests in the past.  Enjoy!   Thank you to CK Worldwide for sponsoring this Stubby Episode!    If your looking to a top quality torch be sure to check out all of CK Worldwide products.  Do you have a specialty job coming up that a normal torch just wont work, CK Worldwide most likely will have the right solution for you.  Be sure to head over to CKworldwide.com to see all their great products!   If you're heading to Fabtech be sure to take the time to stop by the CK Booth and see first hand all the different torches and products CK offers!     If you have a question for us to answer in a Stubby episode please send them to [email protected] and put Stubby in the subject line.  Thank you!  
10/30/20197 minutes, 2 seconds
Episode Artwork

Bag of Welds aka Ryan Hussey

Thank you for listening to episode 164 of the Welding Tips and Tricks Podcast!  For this weeks guest we had a fun chat with @Bagofwelds on Instagram aka Ryan Hussey.  Ryan works in a very interesting part of the welding world and recently changed jobs to an even more interesting job.  We had fun chatting about the parts Ryan welds on and how he found himself where he is today.  We hope this episode might help open your eyes to just how vast this welding world is we work/live in.  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!         We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Ryan?   On Instagram @Bagofwelds   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
10/28/20191 hour, 5 minutes, 39 seconds
Episode Artwork

Stubby 1 7018

Thank you for listening to the first Stubby Episode!  We wanted a better way of answering questions that we get from all of you, our listeners.  We hope that you enjoy this short form episode and join in by sending in your own questions!   This weeks Stubby is answering the question about how to deal with Wet 7018s.     Thank you to CK Worldwide for sponsoring this Stubby!   Be sure to check out www.ckworldwide.com for all you Tig Torch needs.  All of us here on the podcast really enjoy using CK products.  If you're heading to Fabtech 2019 be sure to stop in the CK booth (B33015) to see for yourself all the different kinds of products they offer to this great industry!     If you would like to send in your questions please send them to [email protected] and please use Stubby in the Subject Line!    Enjoy!
10/24/20196 minutes, 10 seconds
Episode Artwork

Starting Tig Welding Aluminum

Thank you for listening to episode 163 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to act like we were just starting out Tig Welding Aluminum.  What all would you need?  We talk about everything from machines to filler and why you should get these things.  So if you're thinking of buying a Tig machine for starting a company or just messing around in the garage on the weekends you want to take some notes!      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!         We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
10/21/20191 hour, 5 minutes, 51 seconds
Episode Artwork

Lulu from Dugz Welding Caps

Thank you for listening to episode 162 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a great time chatting with Lulu from @Dugzweldingcaps on Instagram.  During this chat we went down a lot of different rabbit holes but it was a really fun conversation.  We hope that you enjoy it as much as we did and if you're new to the welding field like Lulu you really want to take some notes.       If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Thank you to Clash of the Grinders for sponsoring this episode!  Hopefully you were able to enter to get a chance to be selected as one of the 12 competitors for this compition that is going to be held on November 12th at Fabtech 2019.  If you're not going to able to make it to Fabtech you still can tune in to watch everything live on Facebook and YouTube!  Be sure to check out s.3m.com/cotg for up to date information!       We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Where can you find Lulu?   On Instagram @Dugzweldingcaps   Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
10/14/20191 hour, 23 minutes, 12 seconds
Episode Artwork

Odd Tools

Thank you for listening to episode 161 of the Welding Tips and Tricks Podcast!  For this episode we go over some of the odd tools that we have always liked to have in our boxes over the years.  These tools are not common in the welding world and might be something that could help you as they have helped us along the way.  We hope this episode helps you look outside the normal world of welding tools and gets you to explore more options!  Have a great week and Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!    We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.        Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
10/7/20191 hour, 4 minutes, 54 seconds
Episode Artwork

Lost Arts Forge Jose 'Pep' Gomez

Thank you for listening to episode 160 of the Welding Tips and Tricks Podcast!  For this episode we had a great conversation with someone that goes by a few different names.  Some of you might know him as Jose Gomez, some as Pep, and some as @Lostartsforge.  We have wanted to get Pep on for a long time because he has a very interesting background in welding and blacksmithing.  We hope you enjoy this episode as much as we did recording.  Get ready to sit back and listen!  Have a great week everyone!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!    We would also like to Thank Bugo Systems for sponsoring this episode!  For all your mechanized  welding and cutting needs be sure to check out Bugo.com to see the latest and greatest units!          Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.    Where can you find Lost Arts Forge?   On Instagram @lostartsforge    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!   
9/30/20191 hour, 23 minutes, 31 seconds
Episode Artwork

Shop Layout

Thank you for listening to episode 159 of the Welding Tips and Tricks Podcast.  For this episode we thought it would be fun to talk about Shop Layouts.  There are many different types of shops and how they are laid out can make a big difference in whether or not they are efficient or not. We talk about shops we've worked in and how we would like to see our shops in the future.  Hope this episode helps you stop and look at how your shop is laid out and possibly spark an interest in you to move some things around!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
9/23/20191 hour, 4 minutes, 31 seconds
Episode Artwork

Aren Jenkins

Thank you for listening to episode 158 of the Welding Tips and Tricks Podcast!  For this weeks episode we had a fun chat with @arenjenkins.  We had a chance to meet Aren at the past few Fabtechs and it is always a pleasure.  We thought it would be fun to have him on because Aren live and works in a small town in Alaska.  Hearing just how different it is and how sometimes you just have to make due with what you have made for an interesting conversation!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Aren?   On Instagram @Arenjenkins   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
9/16/20191 hour, 2 minutes, 32 seconds
Episode Artwork

Tungsten Grinders

Thank you for listening to episode 157 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to talk all about Tungsten Grinders.  Roy recently upgraded his Sharpie grinder from Arc-Zone which sparked an interest to talk more about that tool and others like it.  Are they worth it or not?  Find out and maybe you'll look at how your sharpen you tungsten a little differently after listening!  Enjoy   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
9/9/201958 minutes, 34 seconds
Episode Artwork

Larry and Dave from P2 Industries

Thanks for listening to episode 156 of the Welding Tips and Tricks Podcast!  For this weeks show we had a fun conversation with Larry and Dave from @P2ind.  You need to be following these guys!  They put a big twist on industrial furniture and many other things.  If you can think it, they can build it.  These guys have a great outlook and it really shows in their work.  We hope you enjoy this episode as much as we did!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Larry and Dave?   On the web at P2ind.com On Instagram @p2ind    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
9/2/20191 hour, 17 minutes, 39 seconds
Episode Artwork

High Speed Pulse

Thank you for listening to the Welding Tips and Tricks Podcast episode 155.  During last weeks After Show we had talked about welding razor blades together with the Fronius MagicWave 230i and Jody had asked about using High Speed Pulse.  After that we thought it would be a good topic so here it is!  Have you ever tried it?  If not, you'll want to take some notes and if you think the project you're working on could benefit from it, do some tests!  Have a great week everyone!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
8/26/20191 hour, 1 minute, 32 seconds
Episode Artwork

5th Street Fab aka Max Hemphill

Thank you for listening to episode 154 of the Welding Tips and Tricks Podcast!  For this episode we had a great time chatting with @5thstreetfab aka Max Hemphill.  If you're not following Max stop now and go do it!  Max has some amazing aluminum welds and much more!  Talking with Max we learned a lot about the type of work he's doing and some tricks to how he gets those perfect welds.  Be sure to take some mental notes!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Max?   On Instagram @5thstreetfab On YouTube at 5th Street Fab   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
8/19/20191 hour, 1 minute, 48 seconds
Episode Artwork

Tig Torch Amp Controllers

We're back with a new episode of the Welding Tips and Tricks Podcast!  We've been asked a few times to do a topic episode about Tig Torch Amp Controllers.  There are loads of different types and styles out there and we have used a lot of them so we go over some that we've liked and some that we didn't like.  We know that there are many more styles out there that we've never seen before too.  This episode is more just an overview of the basic styles to let you know the different options out there so you can look into them to possibly help you out with your projects!  Hope you find some good tips or sparks some interest!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M        Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.      Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
8/12/201949 minutes, 16 seconds
Episode Artwork

Re-post of Episode 25 with Cody Swinehart

Thank you for listening to episode 152 of the Welding Tips and Tricks Podcast!  For this episode we all were out of town so we were not able to record but thought it was a good time to re-post an old episode with Cody Swinehart from Quarter Tilt Kreations.  This was a really great episode!  The audio is a little rough but the content is great!  This also shows you how far we've come with the podcast!  Thank you everyone for supporting us here on the podcast!  With out your support we wouldn't be able to keep this going.  We hope you enjoy this re-posting and we'll be back with a new episode next week!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!      We'd like to Thank our Sponsor for this Episode!    Clash of the Grinders by 3M      Do you think you have what it takes to be the fastest grinder in America?  Here's your chance to show what you've got!  This year at Fabtech 2019 in Chicago 3M is putting on their Second Annual Clash of the Grinders!   12 selected participants will go head to head grinding 3 4 inch long welds to see who is the fastest!  To enter head over to 3m.com/PodClash and join the fun!         Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Where can you find Cody?   On Instagram @quarter_tilt_kreations     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!         
8/5/20192 hours, 20 minutes, 38 seconds
Episode Artwork

Mike Challgren

Thank you for listening to episode 151 of the Welding Tips and Tricks Podcast!  For this episode our special guest is Mike Challgren.  If you are apart of the welding community on Instagram we're sure you have heard that name and seen Mike's great wire frame sculptures.  We have been wanting to get Mike on for a long time now and finally were able to make it happen.  We enjoyed hearing about Mike's past and what lead him to where he is today.  Hope everyone enjoys this episode as much as we did.      If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!    Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Lattin Precision, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Where can you find Mike?   On Instagram @mikechallgren Email at [email protected]   Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
7/29/20191 hour, 9 minutes, 58 seconds
Episode Artwork

Troubleshooting

Thank you for listening to episode 150 of the Welding Tips and Tricks Podcast!  Can you believe we're at episode 150!?!  We've been getting a bunch of emails and DMs asking about different troubleshooting issues so we thought it would be a good time to have another Troubleshooting conversation!  Our last Troubleshooting episode was 55.  We hope that we touch on something that you might have been having problems with and or can stick in your mental notes for a later date!  Thank you everyone for the support!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!    Thank you to our Sponsor for this episode!    ZTFab!  If you're in the market for an awesome welding cart or other shop organization tools be sure to head over to www.all-a-cart.com and do not forget to add the coupon code PODCAST at checkout for an extra 5% off you items!     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
7/22/20191 hour, 17 minutes, 59 seconds
Episode Artwork

@Lattinprecision aka Eli Lattin

Thank you for listening to episode 149 of the Welding Tips and Tricks Podcast! For this weeks episode we had a great time chatting with @Lattinprecision aka Eli Lattin. If you're not following Eli you need to stop everything now and go follow!! Eli is a wealth of knowledge and he really dropped a lot of it in this episode. If you're new to the game or a seasoned veteran you'll really want to pay close attention and take some good mental notes. Thanks again Everyone!! Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!    Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
7/15/20191 hour, 4 minutes, 21 seconds
Episode Artwork

2019 Mid Year Review

Thank you for listening to episode 148 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be a good time to stop and take a few to look back at how our 2019 is going.  Mid Year Review from what we said we wanted to do at the beginning of the year.  It's crazy to think that 2019 is half over!  Hope this episode helps you stop and review how your year is going and get you thinking of how you would like to finish out 2019!  Thanks again for listening!  Enjoy! If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!    Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
7/8/201956 minutes, 20 seconds
Episode Artwork

Works By A Hurst

Thank you for listening to episode 147 of the Welding Tips and Tricks Podcast!  For this episode we had a great conversation with Works By A Hurst aka Jason Hurst.  If you're not following Jason on his channels you're really missing out.  Jason is known for many things but most of all his sculpting and art work.  We talk about what got him into metalworking and where he sees it taking him in the future.  We hope you enjoy this episode and pick up a few great tips along the way. Thanks for listening everyone!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Jason?   On Instagram @worksbyahurst On the web at www.worksbyahurst.com On YouTube at Worksbyahurst On Patreon at Worksbyahurst   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
7/1/20191 hour, 7 minutes, 5 seconds
Episode Artwork

Question and Answers from Instagram

Thank you for listening to episode 146 of the Welding Tips and Tricks Podcast!  For this episode we reached out to you all on Instagram for some questions so we could do a listener Q&A and received a lot of great questions for that story.  We picked a few to chat about and just let the conversation flow!  We hope you enjoy this episode and have a great week!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Yourwelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
6/24/20191 hour, 4 minutes, 26 seconds
Episode Artwork

Tig Junkie aka Patrick Murray

Thank you for listening to episode 145 of the Welding Tips and Tricks Podcast!  For this weeks episode our guest is Tig Junkie aka Patrick Murray.  We had a chance to meet Patrick at Fabtech this past year.  He flew all the way from Australia to join in on the fun.  During our conversation we chat about what got Patrick into welding among many other things!  We hope you enjoy this weeks show.  Thank you again for listening!       If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Patrick?   On Instagram @tig_junkie On the Web at Tigjunkie.com   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
6/17/201959 minutes, 30 seconds
Episode Artwork

Grinders

Thank you for listening to episode 144 of the Welding Tips and Tricks Podcast.  We thought it would be a good time to talk about Grinders.  Why you might ask?  Because we all have a need for them in almost ever aspect of welding.  They might not be the most glamorous tool in our toolbox but at times they can be very valuable.  Also does cost and brand really matter?  These are the things we chat about this week.  Hope everyone has a great week!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com   image: https://assets.libsyn.com/secure/show/83032/Bug_O.jpg   Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
6/10/201959 minutes, 34 seconds
Episode Artwork

Revisit with Abom79 aka Adam Booth

Thank you for listening to episode 143 of the Welding Tips and Tricks Podcast!  For this episode we thought it would be fun to have a revisit with a past guest, Abom79 aka Adam Booth.  If you remember we had Adam on for episode 49.  A lot has changed for Adam since then so we wanted to chat and catch up a bit.  We hope you enjoy this episode and if you're on the doorstep of going out on your own, you don't want to miss this one!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
6/3/20191 hour, 1 minute, 32 seconds
Episode Artwork

Safety in Your Personal Shop

Thank you for listening to episode 142 of the Welding Tips and Tricks Podcast!  For this episode we thought it fitting that we chat about Safety in your own shops.  Roy had a close call with dropping a heavy angle block off the table and landed on his foot.  Thankfully he was wearing steel toe shoes.  Would you normally be?  This is the questions that we talk about and try to bring up some concerns with working for your self at home or in a small shop environment.  We hope this episode makes you double think how you work in your own shop!  Have a great week and stay safe!!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
5/27/201955 minutes
Episode Artwork

Cup Size... Does it really matter?

Thank you for listening to episode 141 of the Welding Tips and Tricks Podcast!  For this episode we chatted about Does Cup Size Really Matter?  We all have our favorites and our go to's when it comes to Tig but do they really make a difference or just personal preference?  Listen to find out more.  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
5/20/201951 minutes, 22 seconds
Episode Artwork

Some Fun Stories From Our Past

For this weeks Episode we thought it would be fun to look back and tell a few funny stories from our past and just see where the conversation flows.  We weren't really sure where it would lead but thought it would be entertaining with possible a few tips along the way.  Have a great week everyone!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, YourWelder.com, Smith Industries, Rockbottom Fabrication,   Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
5/13/201953 minutes, 46 seconds
Episode Artwork

David DeMoise

For this episode our guest is DDeMoise aka David DeMoise.  We have been wanting to get David on for a while and we finally did.  We talk about everything from his past up to his present.  What got him into making fixture tables and much more.  Went down a few rabbit holes too.  We hope you enjoy this conversation and have a great week!!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find more about David DeMoise?   On Instagram at @DDeMoise    Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
4/29/20191 hour, 11 minutes, 18 seconds
Episode Artwork

ROI with John Saunders

Thank you for listening to episode 138 of the Welding Tips and Tricks Podcast.  For this episode we had a great conversation with John Saunders from Saunders Machine Works and NYCCNC on youtube about ROI.  If you're running a business or thinking about starting a side hustle you'll want to listen to this one a few times and take lots of notes!  Really an eye opening conversation for sure!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find more about John Saunders?   Online at www.saundermachineworks.com On Youtube at NYCCNC On Instagram at @saundersmachineworks   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
4/22/20191 hour, 20 minutes, 49 seconds
Episode Artwork

How the Podcast has Impacted Us

Thank you for listening to episode 137 of the Welding Tips and Tricks Podcast!  For this episode we take some time and reflect on how the podcast has changed our lives.  From where we are now to where we could have been with out it, how it has impacted us, how we hope it has impacted you the listeners.  We have had a lot of fun bring this podcast to you for your enjoyment and look forward to what the future holds!  Enjoy!    If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake and Artlist.io
4/15/201953 minutes, 52 seconds
Episode Artwork

Hey, I have a Frame Tacked and Ready for you to Weld...

Thank you for listening to episode 136 of the Welding Tips and Tricks Podcast!  For this episode we talk about what's the best way to approach a prospective or current customer when they call you up saying they have a frame or part all tacked up ready for you to weld.  When it's someone you've never met before this can be very interesting.  Do you just say no or do you give a shot.  Give this one a listen and see what we think.  Have a great week everyone!!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
4/8/201956 minutes, 41 seconds
Episode Artwork

Rick Bishop

Thank you for listening to episode 135 of the Welding Tips and Tricks Podcast!  For this episode our guest is @Ricks_Got_It aka Rick Bishop.  We had a great conversation with Rick finding out what got him into welding and what lead him to starting Rick's Welding Service.  If you're new to the trade we hope you pay close attention to what Rick has to say.  Might lead you in a new direction.  Hope everyone has a great week!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you find Rick?   On Instagram @Ricks_got_it On the Web at http://www.ricksweldingservicellc.com/       Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
4/1/20191 hour, 4 minutes, 32 seconds
Episode Artwork

Tools, Gadgets, and Gizmos

Thank you for listening to episode 134 of the Welding Tips and Tricks Podcast!  With all the new Tools, Gadgets, and Gizmos out on the market we thought it would be fun to talk about the ones we like to use and some that would like to get.  We hope that this episode sparks an interest in you to grow your tool collection as it does ours!  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
3/25/201953 minutes, 30 seconds
Episode Artwork

Chris Bliven

Thank you for listening to episode 133 of the Welding Tips and Tricks Podcast!  For this episode we chat with Chris Bliven aka Milkycereal83 on Instagram and YouTube.  Chris is a salesman for Fronius USA but is also a weldor.  We wanted to hear how Chris got into welding and what lead him to work with Fronius.  We had a fun time chatting with Chris and hope you enjoy it too!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where can you Find Chris?   Instagram @Milkycereal83 YouTube at Milkycereal83 Twitter Milkycereal83   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
3/18/201958 minutes, 8 seconds
Episode Artwork

WPS? PQR?

Thank you for listening to episode 132 of the Welding Tips and Tricks Podcast!  For this week's topic we open the conversation of what is a PQR and WPS?  What are they for and who are they for?  As always this is a very deep subject and we only really scratch the surface, but we hope that our conversation sparks an interest in you to research this further.  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are RoboVent, Smith Industries, Jimi Luck, Veteran Welding Co, Rick's Welding Service, David Doherty, Pick's Fab, Walt Oglesby, L&N Welding, H4 Fab Works, Marcus Hansen, Bibli, James Lindstedt, Mike Howe, Scott Tasso, Anthony Chrisomalis, William Herman, Yusuf Khan, Unobtainium Welding, Forrevver Endeavors, Kyle Lenker, Smashboogie 4x4, Adams Industrial, Matthew McDowell, Andy Katanic, S&S Metal Fabrication, Diesel Repair Services.     Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
3/11/20191 hour, 1 minute, 23 seconds
Episode Artwork

Start Your Own Business, They Said, It will be Fun...

Thank you for listening to episode 131 of the Welding Tips and Tricks Podcast!  For this episode we wanted to talk about the not so great parts of running your own business.  Not to be a downer but to let you know that it can be a real struggle at times.  If you're thinking of stepping out on your own these are real things that you'll deal with and if you're already on your own you're not alone.  We hope that this chat opens you're eyes a little more to the other side of the table!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
3/4/201958 minutes, 14 seconds
Episode Artwork

Getting the most out of your Class

Thank you for listening to episode 130 of the Welding Tips and Tricks Podcast!  We got an email asking how they can maximize the time they're in welding school and what to expect for an upcoming weld test when they go to get a job.  There was a few more items to the email that we touched on.  It was fun to look back to where we came from and how we look at things differently today.  If you were to go back to school tomorrow would you run the padded bead plate differently then you did while you were there?  We hope you enjoy this episode and helps you in your class or makes you think back to when you were green.  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com     Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding! 
2/25/20191 hour, 1 minute, 23 seconds
Episode Artwork

Vertical 7016? with Andrew Cardin

Thank you for listening to episode 129 of the Welding Tips and Tricks Podcast!  Andrew Cardin, @thebostonweldah, has been hanging out with Jody for the past week or so working on some weld procedures, so we thought it would be a good time to chat about what they have been up to.  Ever welded pipe vertical with 7016 rod?  If you're in the gas pipe world you'll want to take some good notes this might be something coming down the line in your future.  Have a great week everyone!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!     Thank you to our Sponsor for this episode BugO Systems!   Bugo Systems provides operator-controlled mechanized solutions for your welding, cutting, and custom solutions. Visit them at www.bugo.com   Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum       Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
2/18/20191 hour, 11 minutes, 36 seconds
Episode Artwork

Plasma Tables with ZTFab Paul Brinegar

Thank you for listening to episode 128 of the Welding Tips and Tricks Podcast!  For this episode we talk all about Plasma Tables and also, asked ZTFab Paul Brinegar to give us a few pointers into what to look for and some tips to improving your cut quality.  Just like with everything else there a lot more to just buying a table and you're off to the running.  If you're in the market for your first table or trying to improve the one you have be sure to get out some paper and pens to take notes!  It will be worth it!  Enjoy.   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find ZTFab?   On Instagram @ztfab On the Web at All-A-Cart.com   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
2/11/20191 hour, 4 minutes, 19 seconds
Episode Artwork

Good versus Bad Machines

Thank you for listening to episode 127 of the Welding Tips and Tricks Podcast.  For this episode we took some time to talk about good versus bad machines.  What we like to look for in a Tig welder.  You don't always have to get a legacy brand machine to get all the fancy tools, or do you?  This episode took a few good twists and turns.  We hope you enjoy!  Have a great week!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
2/4/20191 hour, 9 minutes, 10 seconds
Episode Artwork

Craftsmanship

Thank you for listening to episode 126 of the Welding Tips and Tricks Podcast!  For this episode we had a suggestion sent to us from one of our Patrons asking our thoughts on Good Craftsmanship versus Bad Craftsmanship.  This is a very broad topic and we didn't really know where this conversation would end up.  Hopefully we answered a few questions our Patron had and possible some of yours too.  Have a great week everyone!  Enjoy!   If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.   Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
1/28/201952 minutes, 1 second
Episode Artwork

Aluminum Certification Test Welds

Thank you for listening to episode 125 of the Welding Tips and Tricks Podcast!  For this topic episode we talked about some of the key steps you should do to pass an aluminum certification weld test.  Mostly focused towards the D17.1 tests.  Aluminum is notorious for being a pain to get to pass x-ray with porosity issues and a few other common indications.  If you're future holds a test like this in it you'll want to take some notes!  Have a great week.  Enjoy!     If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.       Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake
1/21/20191 hour, 7 minutes, 1 second
Episode Artwork

Matt Hayden

Thanks for listening to episode 124 of the Welding Tips and Tricks Podcast!  For this weeks guest we talked to Matt Hayden, who is a welding instructor at Cedartown High School and is heavily involved with the SkillsUSA competitions.  If you have ever wondered what it was like to be involved in these events here's a front seat look from an instructors point of view along with a competitor.  We hope this episode will help open your eyes to the world of welding outside the shop.  If you're currently in school you need to look into the Skills program.  Life lessons at your fingertips.  Enjoy!       If you're liking what you hear please leave us a comment and rating on whatever podcast platform your listening from.  It's always great to hear what our listeners think.  Plus, the more positive ratings we get the higher the podcast is gets ranked which will make it seen for more future listeners.  Thanks!       Welding Tips and Tricks Podcast Patreon Page    We also would like to take a moment and thank those who support the show on Patreon. Each Patron helps keep the show going and allows us to publish each and every week. If you would like to support the show, in any dollar amount, head over to www.patreon.com/weldingtipsandtrickspodcast. Everyone there is greatly appreciated. This months top supporters of the show are Adams Industrial, Andy Katanic, Anthony Chrisomalis, Bibli, Brandon Parry, Cory Dobson, Datum.build, David Doherty, Demented Metal Werkz, Forrever Endeavors, Gamble Garage, RoboVent, H4 Fab Works, Jacob Elder, Jacob marple, Jimi Luck, Kyle Lenker, Lick Skillet Fab, Marcus Hansen, Mike Howe, L&N Welding, Noe Sanjuan, Pick's Fab, Steven Funk, Richard Black, Ricks Welding Service, S&S Metal Fabrication, Scott Tasso, Shane Gunnin, Smashboogie 4x4, Smith Industries, Unobtainium Welding, Veteran Welding Co, Walter Oglesby, William Herman, Yusuf Khan.    Welding Tips and Tricks T-Shirts     Available at Weldingtipsandtrickspodcast.com   Sizes S-3XL   Free Shipping within the USA    Outside the USA please contact us and we'll find out the best shipping options for you..   NYC CNC Intro to Tig Welding Class    Do you want personal and hands on TIG Weld training from professionals in the industry? Roy Crumrine and Jonathan Lewis have partnered with John Saunders of Saunders Machine Works in Zanesville, OH to offer private welding training for beginners and advanced. To date we have our Intro to TIG Welding Class designed for those who either have absolutely no welding experience to those who are hobbiests that want to up their game. In this two day class we will be going over Welding Safety, TIG welding basics, filler metal selection, tungsten prep and a lot more. What you really are looking forward to is the hands on welding you will receive from Roy and Myself. Our classes are limited to 6 students each which allows the best experience possible. At the end of the two days you WILL be able to lay down a decent weld and be ready to go back to your home shop and build on the knowledge we gave to you.     Find more information at www.learntig.com     Where Can You Find the Welding Tips and Tricks Forum?   Welding Tips and Tricks Forum   Where can you find Us?   You can email Welding Tips and Tricks Podcast directly at [email protected].     We would really like to hear your thoughts about this podcast and what would make it better for you, the listener.  Please leave us any questions that you would like to hear about welding, or questions you'd like to know about ourselves and future guests.     Give us a Call   You can also now call and leave us a voicemail!   (915)308-7024     How to reach us individually      Jody Collier           http://www.weldingtipsandtricks.com/                              Welding Tips and Tricks on Youtube                              @Weldmonger on Instagram                     Jonathan Lewis     http://www.superiorweldandfab.com/                              @Superiorwelding on Instagram                              Superiorwelding on Youtube                          Roy Crumrine        http://www.crummywelding.com/                              @CrummyWelding on Instagram     Interested in weld purging equipment as discussed in this show? Head over to superiorweldandfabsupply.com to check out our complete selection of weld purging tools to help you make those perfect welds.       Where can you find a Tig Finger?   You can find Tig fingers and other great welding supplies, like stubby gas lens kits, here at this link http://weldmongerstore.com/.  All of which are great tools to have in your job toolbox and also your home shop box.     This Podcast has been brought to you by Weldors for Weldors so that you can listen to Weldors talk about Welding while you're Welding!        New music brought to you by Jody's son Jake